www.mo xa .c o m Wireless Computers > UC-8410A Series Industrial Computing 27-15 27 Hardware Specifications Computer CPU: ARMv7 Cortex-A7 dual-core 1 GHz USB: USB 2.0 hosts x 2, Type A connector DRAM: 512 MB DDR3 SDRAM onboard (up to 1 GB, by CV request) OS (pre-installed): Debian ARM 8 Storage Main Storage: 1 GB SD card for OS Storage Expansion: mSATA slot Ethernet Interface LAN: Auto-sensing 10/100/1000 Mbps ports (RJ45) x 3 Magnetic Isolation Protection: 1.5 kV built-in Serial Interface Serial Standards: RS-232/422/485 software-selectable ports (8-pin RJ45) x 8 Console Port: RS-232 (TxD, RxD, GND), 4-pin header output (115200, n, 8, 1) Serial Communication Parameters Data Bits: 5, 6, 7, 8 Stop Bits: 1, 1.5, 2 Parity: None, Even, Odd, Space, Mark Flow Control: RTS/CTS, XON/XOFF, ADDC® (automatic data direction control) for RS-485 Baudrate: 50 bps to 115.2 kbps (supports nonstandard baudrates; see user’s manual for details) Serial Signals RS-232: TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND RS-422: TxD+, TxD-, RxD+, RxD-, GND RS-485-4w: TxD+, TxD-, RxD+, RxD-, GND RS-485-2w: Data+, Data-, GND Digital Input Input Channels: DI x 4 Input Voltage: 0 to 30 VDC Digital Input Levels for Dry Contacts: • Logic level 0: Close to GND • Logic level 1: Open Digital Input Levels for Wet Contacts: • Logic level 0: +10 to +30 V (COM to DI) • Logic level 1: +3 V max. Connector Type: 10-pin screw terminal block (4 points, COM, GND) Isolation: 3 kV optical isolation Digital Output Output Channels: 4, sink type Output Current: Max. 200 mA per channel On-State Voltage: 24 VDC nominal, open-drain to 30 V Connector Type: 10-pin screw terminal block (4 points, GND) Isolation: 3 kV optical isolation LEDs System: Power, Ready, Storage, Diagnostic, Wireless signal strength LAN: 100M/Link/Act x 3, 1000M/Link/Act x 3 (on connector) Serial: TxD x 8, RxD x 8 (on connector) Reset Button: Supports “Reset to Factory Default and System diagnostics” Physical Characteristics Housing: SECC sheet metal (1 mm) Weight: 1 kg (2.21 lb) Dimensions: 200 x 120 x 48.6 mm (7.87 x 4.72 x 1.91 in) Mounting: DIN-rail, wall Environmental Limits Operating Temperature: Standard Models: -10 to 60°C (14 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) Storage Temperature: Standard Models: -20 to 75°C (-4 to 167°F) Wide Temp. Models: -40 to 85°C (-40 to 185°F) Ambient Relative Humidity: 5 to 95% (non-condensing) Anti-Vibration: 2 Grms @ IEC-68-2-34, random wave, 5-500 Hz, 1 hr per axis Anti-Shock: 20 g @ IEC-68-2-27, half sine wave, 11 ms Power Requirements Input Voltage: 12 to 48 VDC (3-pin terminal block) Input Current: • 1570 mA @ 12 VDC • 420 mA @ 24 VDC Power Consumption: 18 W Standards and Certifications Safety: UL 60950-1, CCC (GB9254, GB17625.1) EMC: EN 55022 Class A, EN 55024-4-2, EN 55024-4-3, EN 55024-4-4, FCC Part 15 Subpart B Class B Reliability Alert Tools: Built-in buzzer and RTC (real-time clock) Automatic Reboot Trigger: Built-in WDT (watchdog timer) Warranty Warranty Period: 5 years Details: See www.moxa.com/warranty Note: The Hardware Specifications apply to the embedded computer unit itself, but not to accessories. In particular, the wide temperature specification does not apply to accessories such as the power adapter and cables.