12-57 in fo @ mo xa .c o m www.mo xa .c o m Device Connectivity Multiport Serial Boards > CI-134 Series 12 The CI-134 series ISA boards come with 4 independent RS-422/485 serial ports for connecting data acquisition equipment and other serial devices to a PC. Connect your devices over longer distances— up to 1.2 km (4000 ft)—and ensure greater reliability in industrial environments with on-board surge protection and electrical isolation (available with some models). Enjoy greater versatility by using point-to-point full duplex connections, or set up a half duplex RS-485 multi-drop network. 4-port RS-422/485 ISA serial boards CI-134 Series › ›Cost-effective ISA boards with 4 RS-422/485 ports › ›RS-485 data direction control with ADDC® or by RTS › ›921.6 kbps maximum baudrate for super fast data transmission › ›16-byte FIFO and on-chip hardware flow control › ›Surge protection and electrical isolation available › ›Built-in termination resistors Available Models CI-134-DB9M: 4-port RS-422/485 ISA serial board (CBL-M37M9x4-30 cable included) CI-134I-DB9M: 4-port RS-422/485 ISA serial board with electrical isolation (CBL-M37M9x4-30 cable included) CI-134IS-DB9M: 4-port RS-422/485 ISA serial board with electrical isolation and surge protection (CBL- M37M9x4-30 cable included) CI-134 w/o Cable: 4-port RS-422/485 ISA serial board (CBL-M37M25x4-30 cable included) CI-134I w/o Cable: 4-port RS-422/485 ISA serial board with electrical isolation (CBL-M37M25x4-30 cable included) CI-134IS w/o Cable: 4-port RS-422/485 ISA serial board with electrical isolation and surge protection (CBL-M37M25x4-30 cable included) Connection Options (one cable is included with each board) CBL-M37M9x4-30: M37 to 4 x DB9-M cable, 30 cm CBL-M37M25x4-30: M37 to 4 x DB25-M cable, 30 cm Package Checklist • 1 CI-134 board • 1 connection cable • Documentation and software CD • Quick installation guide (printed) • Warranty card Hardware Comm. Controller: 16C550C or compatible x 4 Bus: 16-bit ISA Connector: DB37 female Serial Interface Number of Ports: 4 Serial Standards: RS-422/485 Max. No. of Boards per PC: 4 Serial Line Protection Electrical Isolation: 2 kV (CI-134I/IS only) Performance Baudrate: 50 bps to 921.6 kbps Built-in Termination Resistor: 120 ohm (enabled by jumper for RS-485-2w) Serial Communication Parameters Data Bits: 5, 6, 7, 8 Stop Bits: 1, 1.5, 2 Parity: None, Even, Odd, Space, Mark I/O Address: 0x0000-0xFFFF (default = 0x180) IRQ: 2 (9), 3, 4, 5, 7, 10 (default), 11, 12, 15 Serial Signals RS-422: TxD+(B), TxD-(A), RxD+(B), RxD-(A), RTS+(B), RTS-(A), CTS+(B), CTS-(A), GND RS-485-4w: TxD+(B), TxD-(A), RxD+(B), RxD-(A), GND RS-485-2w: Data+(B), Data-(A), GND Physical Characteristics Dimensions: CI-134: 85 x 160 mm (3.35 x 6.30 in) CI-134I/IS: 110 x 180 mm (4.33 x 7.09 in) Driver Support Windows: Windows 95/98/ME/NT/2000, Windows XP/2003/ Vista/2008/7/8/8.1 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows 3.x, DOS, Windows Embedded CE 5.0/6.0, Windows XP Embedded Linux: Linux 2.4.x, 2.6.x, 3.x Unix-like Systems: QNX 6, SCO OpenServer, UnixWare 7, Solaris 10, FreeBSD Note: Please refer to Moxa’s website for the latest driver support information. Environmental Limits Operating Temperature: 0 to 55°C (32 to 131°F) Storage Temperature: -20 to 85°C (-4 to 185°F) Ambient Relative Humidity: 5 to 95% (non-condensing) Standards and Certifications EMC: EN 55022/24 EMI: CISPR 22, FCC Part 15B Class B EMS: IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m IEC 61000-4-4 EFT: Signal: 2 kV MTBF (mean time between failures) Time: 424,655 hrs Standard: Telcordia (Bellcore) TR/SR Power Requirements Input Current: CI-134: 450 mA @ 5 VDC CI-134I: 610 mA @ 5 VDC CI-134IS: 620 mA @ 5 VDC Warranty Warranty Period: 5 years Details: See www.moxa.com/warranty Specifications Ordering Information Overview