2-68 www. m oxa. com Introduction to IEC 61850-3 Ethernet Switches 2 Industry-Specific Ethernet Switches > Industry-Specific Ethernet Switches Pin assignment table for JP2 (2 x 10) The EOM Starter Kit includes an evaluation board, power adapter, software CD, and USB-IF certified cable to allow quick and easy evaluation of all embedded redundancy module functions. The Starter Kit evaluation board is equipped with 3 10/100/1000BaseT(X) and 100/1000BaseSFP slot combo ports. Ordering Information Available Modules EOM-G103-PHR-PTP: IEC 62439-3 managed redundancy module with 3 SGMII pinouts reserved for 2 IEC 62439-3 ports and 1 standard Ethernet port, with an extra 1 SGMII reserved for Ethernet console connection, 3.3 V operating power input voltage, -40 to 85°C operating temperature Optional Starter Kits (must be purchased separately) EOM-G103-PHR-PTP-ST: Includes an EOM-G103-PHR-PTP managed redundancy module and an evaluation board with 3 10/100/1000BaseT(X) and 100/1000BaseSFP slot combo ports for testing and application development Package Checklist (modules) • EOM-G103-PHR-PTP module • Developer’s guide Package Checklist (starter kits) • EOM-G103-PHR-PTP module • EOM-G103-PHR-PTP evaluation board • USB Cable: CBL-USBA/B-100 • Universal power adapter • 2 power cords (US or Euro plug) • Developer’s guide Pin Signal Pin Signal 1 Reserved 2 Reserved 3 Reserved 4 Reserved 5 Reserved 6 Reserved 7 3.3V 8 3.3V 9 3.3V 10 3.3V 11 3.3V 12 GND 13 GND 14 GND 15 GND 16 GND 17 Reset_PHY 18 Reset 19 Reserved 20 Reset to Default