www.mo xa .c o m Marine Displays and Panel Computers > Industrial Computing 24-7 MD-119/124 Series 24 MD-124 MD-119 Dimensions Unit: mm (inch) Specifications 444 (17.48) 483 (19.02) 82 (3.23) 384 (15.12) 593 (23.35) 85 (3.35) Display Panel Size: MD-124: 24-inch viewable image size MD-119: 19-inch viewable image size Panel Type: MVA Aspect Ratio: MD-124: 16:9 MD-119: 5:4 Pixels: MD-124: 1920 x 1080 MD-119: 1280 x 1024 (WSXGA+) Pixel Pitch (RGB): MD-124: 0.282 (H) x 0.282 (V) mm MD-119: 0.294 (H) x 0.294 (V) mm Response Time: MD-124: 8 ms (gray to gray) MD-119: 5 ms (gray to gray) Contrast Ratio: MD-124: 5000:1 MD-119: 1000:1 Light Intensity: MD-124: 300 cd/m/m MD-119: 350 cd/m/m Viewing Angles: MD-124: 178° x 178° (right-left/up-down) MD-119: 178° x 178° (right-left/up-down) Active Display Area: MD-124: 531.36 (H) x 298.89 (V) mm MD-119: 376.32 (H) x 301.06 (V) mm / 14.81 (H) x 11.85 (V) in Max. No. of Colors: 16.7M (8-bit) Display Interface: VGA x 1, DVI-I x 2, BNC composite x 3 Resolution: • VGA: 640 x 480 • SVGA: 800 x 600 • XGA: 1024 x 768 • SXGA: 1280 x 1024 • WSXGA+: 1920 x 1080 (optimal setting) (MD-124 only) Serial Interface Serial Standards: 1 software-selectable RS-232/422/485 port, male DB9 Serial Signals RS-232: TxD, RxD, DTR, DSR, CTS, DCD, GND (RTS for MD-124) RS-422: TxD+, TxD-, RxD+, RxD-, GND RS-485-4w: TxD+, TxD-, RxD+, RxD-, GND RS-485-2w: Data+, Data-, GND Front Panel Panel Control Buttons: Power x 1, OSD controls x 4 LEDs: Status, Power Physical Characteristics Housing: Aluminum sheet metal Weight: MD-124: 12 kg (26.67 lb) MD-119: 9.7 kg (21.56 lb) Dimensions: MD-124: 85 x 593 x 384 mm (3.35 x 23.45 x 15.12 in) MD-119: 82 x 483 x 444 mm (3.23 x 19.02 x 17.48 in) Mounting: Console mounting Environmental Limits Operating Temperature: -15 to 55°C (5 to 131°F) Storage Temperature: -20 to 60°C (-4 to 140°F) Ambient Relative Humidity: 5 to 95% (non-condensing) Anti-vibration: • 0.7 g @ DNV 2.4 (Class A), sine wave, 2-100 Hz, 1 Oct./min., 1.5 hr per axis • 1 g @ DNV 2.4, random wave, 3-100 Hz, 2.5 hr per axis • 2.1 g @ DNV 2.4 (Class C), sine wave, 2-50 Hz, 1 Oct./min., 1.5 hr Power Requirements Input Voltage: • 24 VDC (with tolerance from 18 to 36 VDC, 2-pin terminal block) • 110 to 230 VAC, 50/60 Hz Power Consumption: MD-119: 60 W max. MD-124: 90 W max.