3-24 www. m oxa. com Ethernet Media Converters and Extenders Ethernet Media Converters and Extenders > 3 IEX-402 Series IEX-402 Series Introduction The IEX-402 series is an industrial managed Ethernet extender designed with one 10/100BaseT(X) and one DSL port. The Ethernet extender provides a point-to-point extension over twisted copper wires based on G.SHDSL.bis and VDSL2 standards. The IEX-402-SHDSL supports data rates of up to 15.3 Mbps with a long transmission distance of up to 8 km, while the IEX-402-VDSL2 provides data rates of up to 100 Mbps with transmission distance of up to 3 km. The IEX-402 series is designed for use in harsh operating environments. The DIN-rail mount, wide operating temperature range • Automatic CO/CPE negotiation reduces configuration time • IEX-402-SHDSL series: Standard G.SHDSL data rate up to 5.7 Mbps (Turbo Speed connections up to 15.3 Mbps), with up to 8 km transmission distance (performance varies by cable quality) • IEX-402-VDSL2 series: Standard VDSL2 data rate up to 100 Mbps, with up to 3 km transmission distance (performance varies with line conditions) • Supports Link Fault Pass-Through (LFP) and Line-swap fast recovery Specifications Managed DSL Ethernet extenders (-40 to 75°C), and dual power input make it ideal for installation in industrial applications. To simplify configuration, the IEX-402 series uses CO/CPE auto negotiation. By factory default, the device will automatically assign CPE status to one of each pair of IEX devices. In addition, Link Fault Pass-through (LFP) and network redundancy interoperability enhance the reliability and accessibility of communication networks. Advanced managed and monitored functionality through MXview, including a virtual panel, improve the user experience for quick troubleshooting. • Supports SNMP v1/v2c/v3 for different levels of network management • Interoperable with Turbo Ring/Turbo Chain network redundancy • Compatible with EtherNet/IP and PROFINET protocols for transparent transmission • Easy network management through web browser, Telnet/Serial console, Windows utility, MXview, and ABC-01 • IPv6 Ready Features and Benefits › ›Automatic CO/CPE negotiation reduces configuration time › ›Up to 100 Mbps over twisted-pair copper wires (IEX-402-VDSL2) › ›Turbo mode connection, up to 15.3 Mbps over twisted-pair copper wires (IEX-402-SHDSL) › ›Link Fault Pass-through (LFP) support and interoperable with Turbo Ring and Turbo Chain › ›Link quality indicators for simple troubleshooting › ›Easy network management by web browser, Telnet/serial console, Windows utility, ABC-01, and MXview Technology Standards: IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) IEEE 802.3x for Flow Control IEEE 802.1p for Class of Service ITU-T G.991.2 for Single-pair high-speed digital subscriber line transceivers (IEX-402-SHDSL only) ITU G.993.2 for very high speed digital subscriber line transceivers 2 (IEX-402-VDSL2 only) Software Features Management: SNMPv1/v2c/v3, DHCP Client, TFTP, SNTP, HTTP, Telnet, Syslog, LLDP MIB: MIB-II Flow Control: IEEE 802.3x flow control, back pressure flow control Interface DSL Port: DSL Port: RJ11 (RJ45 connector) or detachable 2-contact terminal block RJ45 Ports: 10/100BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection Console Port: RS-232 (RJ45 connector) LED Indicators: PWR1, PWR2, FAULT, STATE, LINK/ACT, CO/CPE, 10/100 (TP port) DIP Switches: IEX-402-SHDSL series: CO/CPE, SNR/SPEED, ANNEX B/ANNEX A, STD/TURBO IEX-402-VDSL2 series: CO/CPE, SNR/SPEED, STD/INP Button: Reset button Switch Properties MAC Table Size: 1K Packet Buffer Size: 512K Physical Characteristics Housing: Metal, IP30 protection Dimensions: 35 x 130 x 105 mm (1.38 x 5.12 x 4.13 in) Weight: IEX-402-SHDSL Series: 290 g (0.64 lb) IEX-402-VDSL2 Series: 275 g (0.61 lb) Installation: DIN-rail mounting, wall mounting (with optional kit)